Automotive, Industrial & Specialised
A professional solution for every application.

Automotive

Acryline APU 10 Clear is a two component aliphatic isocyanate cured, polyurethane acrylic clear coat. Acryline APU 10 Clear cures to a film that demonstrates excellent flow and shine, good film hardness, low dirt retention. It is resistant to weathering, water and mild chemicals.

Acryline APU 105 (4:1) Filler Primer is a two component, high build polyurethane primer/filler with good filling and anti-corrosive properties. It is specifically designed for use under Acryline Polyurethane Acrylic (APU Series). It can be used in the automotive industry for the refinishing of motor cars, for bicycles, motor bikes, heavy vehicles such as buses and trucks as well as boats. It can also be used to paint light machinery and garden furniture. It suits both interior and exterior applications.

Acryline APU 107 One Pack Etch Primer is a polyvinyl butyric, chromate-free etch primer designed for application over a wide variety of substrates including mild steel, galvanised iron, aluminium, fibreglass and previously painted surfaces. It is a versatile and easy to use product which provides excellent adhesion, high corrosion protection and good filling properties. It can be over-coated with nitro-cellulose based products, air dry enamels, 2K Polyurethanes and basecoats.

Acryline Finish is a high quality two-pack base system for use as top coat. Its 2 colours can be blended to produce a wide range of finishes for use as top coats.

Acryline Hardener is a polyisocyanate hardener for Autolac two component acrylic urethane products.

Acryline Matting Agent is designed to be used with Acryline Polyurethane Acrylic (APU) as a matting agent, to obtain a satin or matt finish.

Karnamel Blending Clear is a quick drying, nitro-cellulose "blend in" spray lacquer. It can also be used whenever a quick drying high gloss clear coat on Karnamel Gloss is required.

Karnamel Finish is a nitro cellulose based spray applied coating system for automotive refinishing.

Karnamel Primer is a quick drying, versatile, nitro-cellulose spray primer, which can be easily sanded to give an exceptionally smooth surface. Karnamel Primer has good adhesion and is formulated for use as a primer for pigmented Karnamel Finishes.

Karnamel Rubbing Compound is an abrasive compound based on mixed fatty acids, aliphatic hydrocarbons, abrasive fillers.

Karnamel Spot Putty is a fine nitro-cellulose based putty recommended for repairing small surface defects. Karnamel Spot Putty is easy to apply and is quick drying. It can be easily sanded to give an exceptionally smooth surface.

The Carvello system is manufactured from raw materials of the highest quality available in the world today. Using the most modern technologies based on many years of market experience. The products on the Carvello range include 2k Clear Coats, primers and ancillaries which have been developed to meet the performance requirements of the modern spray painter. The products on the Carvello range have been designed to optimally complement each other and give an extremely high quality finish.

Microlite is a polyester body filler. Quick drying and easy to sand, it is ideal for repair of surface defects. Shows good adhesion to galvanised surfaces.

Spies Hecker consists of 2 types of paints: solvent-based and water-based (WaterBorne). The WaterBorne is a green product which bears the Greentec label. It is a favourite with car manufacturers. Spies Hecker’s distinctive range of products and services speak for themselves.

Raptor Tough and Tintable Protective Coating is a durable polyurethane coating that provides surfaces with a protective barrier that can withstand the toughest situations. Developed to tolerate most climatic conditions, Raptor is UV resistant and won’t fade or “chalk” even after hours in the sun. Raptor is also waterproof and protects surfaces from rust making it perfect for surfaces that will be submerged in water, including salt water.

Raptor’s versatility makes it perfect for almost any application. Spray Raptor on high traffic areas; it is scratch and stain resistant and easy to clean. Its flexible formulation can handle impacts without cracking, making it perfect for its most popular application as a truck bed liner.


Industrial

Bituminous Aluminium is a paint containing aluminium pigment. It is water resistant and anti corrosive.

Chlorinated Enamel is a good quality chlorinated rubber based topcoat highly recommended as an anti-corrosive coating for mild steel and for new and weathered galvanised steel. It is most suitable as a protective coating for cement and concrete surfaces. It has an excellent film build with exceptional resistance to salt spray, humidity and acids. The dry film is highly effective against algae and fungus growth. Chlorinated Enamel is recommended as a finishing coat for chlorinated rubber systems especially in industrial and marine environment and is available in gloss, satin and matt finishes.

Chlorinated Sealer is a chlorinated rubber based sealer for concrete and masonry surfaces. Applied in dilute coats on these surfaces, it provides good sealing and ensures a sound foundation for application of subsequent chlorinated rubber coatings. Recommended for both interior and exterior surfaces.

Chlorinated Zinc Phosphate Primer is a chlorinated rubber based anti-corrosive primer highly recommended for mild steel, for weathered galvanised steel, and as a rust inhibitor for pre-treated new galvanised steel. Chlorinated Zinc Phosphate Primer has excellent film build with exceptional resistance to salt spray, humidity and acids. It is therefore recommended for use as an anti-corrosive primer in industrial and marine conditions.

DD Lack Primer is a fast curing two pack polyurethane protective and decorative topcoat for wood, metallic and masonry surfaces. DD Lack Primer is a hard wearing, flexible coating used as a topcoat on two pack polyurethane systems. It cures rapidly to give a washable finish which is resistant to impact, abrasion, detergent, solvents and mild chemicals. It is available in gloss, satin and matt finish.

DD Lack Zinc Phosphate Primer is a fast curing two pack polyurethane anti-corrosive primer for mild steel and weathered galvanised steel, a rust inhibitor for pre-treated galvanised steel. DD Lack Zinc Phosphate Primer dries to a hard, tough film with excellent adhesion, flexibility and good resistance to solvents and mild chemicals. It is a highly effective anti-corrosive primer recommended for use in two pack polyurethane systems. It provides a good foundation for adhesion of subsequent coats of paint.

Epoxy Mio Enamel is a high quality two-pack polyamide cured epoxy coating which can be used as an intermediate or as a finishing coat on mild and galvanised steel. Epoxy Mio Enamel contains lamellar micaceous iron oxide as an anti-corrosive pigment. It cures to a tough film with excellent adhesion, good resistance to abrasion, salt, water, oil, grease, common solvents and provides excellent protection against corrosion and mild chemicals. Epoxy Mio Enamel is an ideal choice for the protection of mild and galvanised steel located in industrial, marine and other highly corrosive environment. For maximum protection it can be over-coated with an Epoxy Enamel.

Epoxy Sealer Varnish is a two-pack epoxy coating for wood and masonry surfaces. It cures to a tough and hardwearing coating which is resistant to abrasion, water, sea water, alcohol, oils, aliphatic solvents. Applied in diluted coats, it provides good sealing and penetrates porous surfaces to ensure a sound foundation for application of subsequent two pack epoxy, polyurethane and acrylic coatings. Ideal for interior and exterior wood.

Epoxy Tar Enamel is a three-pack polyamide cured epoxy tar paint for the protection of steel. It is highly resistant to water and salt water and can be used on structures which are permanently exposed to high humidity levels. Epoxy Tar Enamel can be applied in thick coats for improved weather and corrosion resistance. It cures to a hard, tough film with good elasticity flexibility and adhesion. Epoxy Tar Enamel is not resistant to acids, petroleum products and strong solvents.

Epoxy Zinc Phosphate Primer is a high quality two-pack polyamide cured epoxy primer for mild steel. Epoxy Zinc Phosphate Primer contains zinc phosphate as an anti-corrosive pigment. It cures to a tough film with excellent adhesion, good resistance to abrasion, salt, water, oil, grease, common solvents and provides excellent protection against corrosion and mild chemicals. Epoxy Zinc Phosphate Primer is an ideal choice for the protection of mild steel located in industrial, marine and other highly corrosive environment. Ideal for interior and exterior use.

Hammer Finish is a quick drying modified alkyd paint for metalised hammer like finishes for furniture and industrial equipment.

HT 332 Metal Primer Grey is a two pack solvent borne vinyl modified epoxy polyamide primer with exceptional adhesion to various substrates such as steel, galvanised steel, light metals such as aluminium and alloys. It is formulated with non toxic corrosion inhibitors and can be welded or torch cut without toxic emissions. It acts as an anti-corrosive primer on steel, galvanised steel, light metals such as aluminium and alloys, as a fast dry maintenance primer, as a shop primer on steel after sand blasting, as a tie coat on old sound epoxy systems and polyurethane systems, as a blocking and bleed resistant primer. It can be used above or below splash zone, for water immersion. Ideal for interior and exterior use.

HT 332 Metal Primer White is a general purpose two-pack solvent borne vinyl modified epoxy polyamide primer with exceptional adhesion to various substrates such as concrete, fibre glass, wood, steel, galvanised steel, light metals such as aluminium and alloys. It is formulated with non toxic pigments and can be welded or torch cut without toxic emissions. It is used as a general purpose primer on concrete, fibre glass, steel, galvanised steel, light metals such as aluminium and alloys, as a fast dry maintenance primer, as a tie coat on old sound epoxy systems and polyurethane systems, as a blocking and bleed resistant primer, above or below splash zone, for water immersion. Recommended for interior and exterior use.

Industrial Hammer Finish is a quick drying modified alkyd paint for metalised hammer like finishes for furniture and industrial equipment.

Red Oxide Metal Primer is an alkyd based primer specially designed for iron. Available in red oxyde colour, Red Oxide Metal Primer is economical, lead free and dries quickly. It protects against corrosion. It is highly recommended in alkyd based systems.

Tarkote is a bitumen based protective coating for metallic and masonry surfaces. It produces a flexible, water resistant coating which protects mild steel against corrosion and provides water proofing characteristics to concrete and plaster. Tarkote is an economical alternative for more sophisticated coating systems.

Raptor Tough and Tintable Protective Coating is a durable polyurethane coating that provides surfaces with a protective barrier that can withstand the toughest situations. Developed to tolerate most climatic conditions, Raptor is UV resistant and won’t fade or “chalk” even after hours in the sun.

Raptor is also waterproof and protects surfaces from rust making it perfect for surfaces that will be submerged in water, including salt water. Raptor’s versatility makes it perfect for almost any application. Spray Raptor on high traffic areas; it is scratch and stain resistant and easy to clean. Its flexible formulation can handle impacts without cracking, making it perfect for its most popular application as a truck bed liner.


Specialised

Acrylic Tennis Court Dressing is a top quality coating for tennis court surfaces.

Antifungus is a high quality acrylic co-polymer emulsion paint formulated with a high dosage blend of fungicides and bactericides for maximum resistance to fungus. Its matt, anti fungus finish is also recommended for bathrooms. Recommended for exterior surfaces, Mauvilac Antifungus is highly effective in humid areas. Thanks to its UV-resistant pigments, vivid natural colours last longer.

Mauvilac Industries, Antifungus

Mauvilac Industries, Go GreenMauvilac Industires, Mauvimatch


Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Mauvilac Clear Emulsion Binder on powdery or absorbent surfaces to get a sound surface for proper adhesion of Mauvilac Antifungus. For wood or wood fiber boards, apply Mauvilac Wood Primer, then sand down the surface and dust off prior to painting.


Application Method
Apply by roller or brush onto clean and dry surface. Thin down with water as required depending on mode of application. Do not overthin. One litre will cover between 9 and 11 m2 of smooth surface in one coat and 3-5m2 of rough surface. Approximately 30 minutes to touch dry, can be over-coated after approximately 3 hours.


Unit Sizes
1l, 5l, 20l


Share
Recommend this page to your friends. Share our love for colour.

Aquapool is a water based swimming pool paint available in white and swimming pool blue with a low sheen finish. Aquapool has good adhesion to concrete, cement plaster and previously painted surfaces. It is resistant to water, alkali and pool chemicals. Aquapool forms a tough, durable, water-tight coating of low permability thus allowing transfer of water vapour and reducing the risk of blistering. It can be used in interior or exterior pools to add beauty and protect the substrate.

Mauvilac Industries, Aquapool

Mauvilac Industries, Go Green


Surface Preparation
A good surface preparation is essential for successful application of Aquapool. Swimming pool paints applications often fail because of inadequate or poor surface preparation. Surface preparation involves hard work and has no short cuts. Fill cracks, holes or spalled areas with grout and non shrink repair materials. New concrete should be filled with water and allowed to age for at least two months. Please refer to the surface preparation instructions on the packaging for further details.


Applicaion Method
Brush or roller is advisable for the first coat to ensure proper penetration into the surface. Subsequent coats can be applied by brush, roller or by spray. Dilute the first coat with 20% water for better penetration into the surface. Subsequent coats can be applied without dilution for brush and roller application, if necessary dilute with water for ease of application. Depending on type of spray equipment, dilute with water. One litre of Aquapool will cover between 8 and 10 m² of surface in one coat. Apply three coats of Aquapool. Allow 24 hours in between coats to ensure complete hardening of each coat.


Unit Sizes
5l


Share
Recommend this page to your friends. Share our love for colour.

Board Paint is a good quality alkyd resin based top coat for school boards where chalk is used as a writing medium. It has good flow properties, is easy to apply and dries quickly to a hard, smooth finish which can be dusted or washed. Board Paint is available in green and black.

Ceramica is an acrylic polyurethane based paint with a satin finish. Specially designed to be applied on ceramic tiles in interiors, it offers excellent adhesion. It is shock and scratch resistant. Easy to apply, it offers a high confort of use thanks to its low odour. Easy to clean, it resists to most of the common used household detergents.

Chlorinated Swimming Pool Paint is a chlorinated rubber based swimming pool paint especially formulated for coating the interior of cement based swimming pools. It has a semi-glossy finish and is is resistant to water and to the standard chemicals used for swimming pool water treatment.

Mauvilac Industries, Chlorinated Swimming Pool Paint

Surface Preparation
Concrete surfaces should be clean and free of any contaminants. Apply one coat of diluted Chlorinated Sealer Clear by roller or brush onto clean, dry surface.


Application Method
Apply by roller or brush two to three coats of Chlorinated Swimming Pool Paint. Airless spray is also possible. Thin down as required with Slow Aromatic Solvent for brush or roller application and when a longer drying time is desirable, Aromatic Solvent for roller or spray application and when a slower drying time is desirable.One litre of Chlorinated Swimming Pool Paint will cover between 7 and 9 m2 of surface in one coat; at this spreading rate the dry film thickness will vary between 50 and 40 microns on a completely smooth, non absorbent surface. Approximately 30 minutes to touch dry, Chlorinated Swimming Pool Paint can be over-coated after approximately 4 hours. The pool can be filled with water after 24 hours of applying the last coat.


Unit Sizes
1l, 5l


Share
Recommend this page to your friends. Share our love for colour.

Coolroof is a hi-tech acrylic water based paint offering a high solar-reflective capacity. It is used on concrete, plaster, fiber cement, unprimed galvanised iron and pre-coated slanted roofs. It can also be used to coat gutters and down-pipes. Coolroof results in cooler indoor temperatures and is energy-efficient as it reduces the need for electrical air-conditioning. Available in 10 most popular roof colors.

Mauvilac Industries, Coolroof

Mauvilac Industries, Go Green


Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Previously painted surfaces which show even slight signs of flaking must be completely stripped. Powdery surfaces should be washed thoroughly to remove chalk and loose material. Surfaces which have been attacked by fungus, algae and mildew must be thoroughly scraped and cleaned. On ferrous surfaces, rust must be removed by wire brushing or by power tool cleaning. Dust off and prime with Aquaprimer.


Application Method
Apply 2 or 3 coats with roller or brush onto clean and dry surface. Coolroof can also be applied with an airless or low pressure sprayer. Thin down with water as required depending on mode of application. Stir well. Do not overthin. One litre will cover between 7 and 9m2 of surface. Approximately 30 to 45 minutes to touch dry, can be over-coated after approximately 3 or 4 hours. Please refer to Technical Data Sheet for more details.


Unit Sizes
5l, 20l


Share
Recommend this page to your friends. Share our love for colour.

Heat Resisting Aluminium HRA4 is a dual pack oleoresinous based heat resisting paint which can be used at continuous temperatures ranging from 100-232 degrees Celsius. It is an ideal maintenance coating for mild steel and weathered galvanised steel which normally operate at the above mentioned temperatures (stacks, retorts, furnaces, boilers, exhausts, etc.) Heat Resisting Aluminium HRA4 will be effective in moist environment and where steam is generated. It is however not suitable for protection against acids, alkalies, solvents and salts. Note: condensation or dew formation on metallic surfaces will result in poor adhesion and subsequent flaking of the paint.

Nanotech Antibacterial is an acrylic-based emulsion paint which contains a highly active nano silver anti-bacterial agent. Nanotech Antibacterial works by releasing silver ions at the surface of the paint film in a controlled manner, it is highly effective against Methicillin Resistant Staphylococcus Aureus, Klebsillia species, Aspergillus Niger and other gram positive, gram negative micro organisms. Nanotech Antibacterial can easily be cleaned and washed, it is resistant to common household detergents and disinfectants. Nanotech Antibacterial can be used safely in areas where a high level of hygienic properties is required and contributes to a cleaner, healthier environment. Its action is long lasting as the silver ions remain effective even after they have sterilised the micro-organisms.

Mauvilac Industries, Nanotech Antibacterial

Mauvilac Industries, Go Green


Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Mauvilac Clear Emulsion Binder on powdery or absorbent surfaces to get a sound surface for proper adhesion of Nanotech Antibacterial. For panel wood or ceiling boards, apply Mauvilac Wood Primer, then sand down the surface and dust off prior to painting.


Application Method
Apply three coats by roller or brush onto clean, dry and sealed surface. Nanotech Antibacterial can be applied by airless or low-pressure spray equipment. Dilution is not necessary. However if dilution is required for ease of application, thin down with water as required. One litre of Nanotech Antibacterial will cover between 9 and 12 m² of surface in one coat; at this spreading rate the dry film thickness will vary between 40 and 35 microns on a completely smooth, non absorbent surface.


Unit Sizes
5l, 20l


Share
Recommend this page to your friends. Share our love for colour.

Proflon is a high quality acrylic-based emulsion paint formulated with Polytetrafluoroethylene and special waxes to provide hydrophobic (water-repellent) properties characterised by water beading on the surface of the dry film. It also contains a high dosage of bactericides to provide maximum resistance against algal and fungal growth. This tough, hard coating repels water, prevents fungus growth is highly washable and is self-cleaning during rainy periods. Anti-block and anti-stain, it is ideal for kitchens and bathrooms.

Mauvilac Industries, Proflon

Mauvilac Industries, Go GreenMauvilac Industires, Mauvimatch


Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Mauvilac Clear Emulsion Binder on powdery or absorbent surfaces to get a sound surface for proper adhesion of Proflon. For panel wood or ceiling boards, apply Mauvilac Wood Primer, then sand down the surface and dust off prior to painting.


Application Method
Apply three coats by roller or brush onto clean, dry and sealed surface. Can be applied using airless or low pressure spray equipment. Dilution is not necessary. One litre will cover between 8 and 10 m2 of surface in one coat. Approximately 30 minutes to touch dry, can be over-coated after approximately 3 hours. Proflon will develop its full hydrophobic properties after 36 hours. It is therefore recommended not to exceed 36 hours before recoating. After this period, it might be necessary to sand down slightly before applying the next coat.


Unit Sizes
1l, 5l, 20l


Share
Recommend this page to your friends. Share our love for colour.

Road Marking Paint is a fast drying synthetic resin based road marking paint which complies with the quality requirements of MS 87. It is approved by the Mauritius Standards Bureau.Road Marking Paint has a high resistance to abrasion, water and diesel fuel. Unlike most of the common road marking paints, this product is resistant to the common problem of bleeding of bitumen through to the paint surface.

Wallsafe is a water based fully washable acrylic paint for interior use. Wallsafe is capable of decomposing toxic organic substances such as formaldehyde (present in certain types of medium fibre density boards used in the furniture industry) under the action of light. It also has the ability to reduce odours, for example tobacco smoke, present in ambient air. Wallsafe can thus contribute to a better living environment indoors.

Mauvilac Industries, Wallsafe

Mauvilac Industries, Go Green


Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Aquaprimer on powdery or absorbent surfaces to get a sound surface for proper adhesion of Wallsafe. For panel wood or ceiling boards, apply Bioundercoat, then sand down the surface and dust off prior to painting.


Application Method
Apply by roller or brush onto clean and dry surface. Wallsafe can be applied by airless or low-pressure spray equipment. Dilute with water if required. However for an efficient paint finish, avoid dilutiing as thinning will reduce opacity. One litre of Wallsafe will cover between 8 and 10 m2 of surface in one coat; at this spreading rate the dry film thickness will vary between 50 and 40 microns on a completely smooth, non absorbent surface. Total film thickness required will be dependent on applications and specifications. For normal applications, apply three coats of 40-50 microns. It will take approximately 30 minutes to touch dry, Wallsafe can be over-coated after approximately 3 hours.


Unit Sizes
1l, 5l, 20l


Share
Recommend this page to your friends. Share our love for colour.

Colorvogue

Colorvogue : Test your colors !
The sample pots are available at our 3 Concept Stores

DETAILS
paint brushes bundles

New Product: Paint Brushes Bundles
Available in packs of 3

DETAILS
A World In Colour

A World In Colour
Discover the wonderful possibilities of colour. Create beauty. Set off trends.

READY TO PLAY
Colour Therapy

Colour Therapy
It’s a well-known fact: Colours do have a direct impact on our emotions and mood.

DETAILS
Colourvogue

Colourvogue
Mauvilac Industries proposes you this selection inspired by fashionable colours of the moment.

DETAILS
Excellence & Choice of Products

Excellence & Choice of Products
An exceptional diversity of coatings for a multitude of uses.

EXPLORE
Visit Our Concept Stores

Visit Our Concept Stores
Strategically situated on the island to steer you towards your best solution.

START HERE