Surface Repair, Treatment & Preparation
Impeccable Surfaces & Lasting Finishes

All Surfaces

Aquasolv Degreaser is a blend of detergents and solvents miscible with water for cleaning oil, grease and dirt from surfaces to be painted.

Fungicidal Wash is a water based bactericide and bleaching agent for cleaning fungi and algae stains.

Fungicidal Treatment is a water based bactericide for treatment and elimination of fungi and algae before painting.

Nitromors High quality paint remover for all types of paints and varnishes (emulsion, alkyd,automotive, epoxy, etc…). Water washable. Ideal for wooden, metal, plastic surfaces.

Test Benzin is a diluent and cleaning solvent for paints. Follow instructions as specified.

Essence de Térébenthine is a diluent and cleaning solvent for various solvent based paints. Follow instructions as specified.

Sealer Primer is a high quality waterborne penetrating sealer and plaster primer. Sealer Primer is an alkali resisting sealer which penetrated deeply into substrates such as cement based plaster, skimming compounds, gypsum boards and RhinoLite® to provide a good foundation for adhesion of subsequent coats of paints. Sealer Primer can also be used as a priming coat on masonry surfaces.


Concrete

Inafil is a ready for use, easily sandable putty for repair of cracks and other surface defects.

Clear Emulsion Binder is an alkali resistant clear sealer for new cement based surfaces and for old paint that has chalked. It will provide maximum adhesion before painting with emulsion paints.

Mauvilith Sealer is a high performance, semi opaque, alkali resistant, penetrating, solvent based sealer for interior and exterior cement plastered surfaces. Can also be applied on old paint that has chalked after removing the chalk. Will provide optimum adhesion for subsequent coats of paints. Dilute with Test Benzin.

Chlorinated Sealer is a solvent based clear sealer for cement based plaster prior to applying Chlorinated Floor Dressing or Chlorinated Swimming Pool Paint. Dilute with Aromatic Solvent.

Epoxy Thinner is a blend of organic solvents to be used as diluent or cleaning solvent for Epoxy products and Hich Tech 332 primers.

Aromatic Solvent is a diluent for Chlorinated Rubber paints and for Road Marking paints. It can also be used as a cleaning solvent.

Sealer Primer is a high quality waterborne penetrating sealer and plaster primer. Sealer Primer is an alkali resisting sealer which penetrated deeply into substrates such as cement based plaster, skimming compounds, gypsum boards and RhinoLite® to provide a good foundation for adhesion of subsequent coats of paints. Sealer Primer can also be used as a priming coat on masonry surfaces.


Wood

Bouche Pores is a cellulose based general purpose sealer for wood. It has fast drying and good sanding properties. Dilute with Karnamel Thinner.

Wood Filler is a water based paste for repairing minor surface defects on all types of wood.

Wood Primer is a top quality general purpose primer for all types of wood. To be used before the undercoat and the finishing coat. Wood Primer can be diluted with Test Benzin.

Nitro Sanding Sealer is a top quality fast drying clear wood sealer with good grain filling properties. Easy to sand-down.

Inacel Thinner is a blend of organic solvents to be used as diluent for Inacel varnishes in order to obtain optimal results. Can also be used as cleaning solvent.

Acid Catalysed Basecoat is an undercoat to be used with the complete Acid Catalysed Wood system and all the finishes that require this undercoat, Acid Catalysed Varnish and Acid Catalysed Hardener.

Aquaprimer is water based, it is ideal as a “shop” primer or as a tie-coat between incompatible products. Can be used as a primer on multiple surfaces such as galvanized iron, mild steel, wood, concrete, cement plaster and green cement. Aquaprimer can be applied by brush, roller or spray onto a clean, dry and sound surface. It dries quickly to produce a low-sheen with exceptionally good adhesion and a good abrasion resistance. Aquaprimer can be over coated with any water or solvent based top coat after 4 hours.

Bioundercoat provides good inter-coat adhesion, good opacity and will help to fill minor irregularities. It is easy to apply, dries quickly and has good sanding properties, thus enabling a perfect surface for a perfect top coat finish. It is recommended to be used in a multilayered system: (1) Aquaprimer, (2) Bioundercoat, and (3) Biogloss. Can also be used directly on wood and wood derivatives. Low odour, solvent free and water based, Bioundercoat is easy to use. Easy to sand, Bioundercoat hides minor surface defects and provides a perfect surface for further coatings.


Metal

Galvanised Iron Cleaner is a solution of a weak acid for etching Galvanised Iron prior to application of an Etch Primer.

Rust Remover is water based acid solution for removing and converting rust on mild steel. Highly effective for etching aluminium and galvanised iron before painting.

Etch Cleaner is a blend of a weak acid, detergents and degreasing agent for etching and cleaning galvanised iron and aluminium and for removing rust on mild steel prior to painting.

MA 10 Primer is a primer for galvanised and aluminium surfaces. It can be covered with different types of finish. Dilute with Etch Thinner.

Super Galva Primer is a solvent based primer for mild steel. For best anti-corrosive results, it can be over-coated with Universal Undercoat, followed by solvent based trim paints. Dilute with Test Benzin.

Karnamel Thinner is a diluent for Karnamel products.

Karnamel Retarder is a retardant solvent. It may be added to Karnamel Thinner when ambiant conditions are unfavourable in order to prevent defects resulting from rapid drying. It can also be used independently as solvent.

Etch Thinner is a blend of organic solvents to be used as diluent or solvent for Two Pack Etch Primer and MA 10 Primer.

Acryline Thinner (Slow & Fast) are blends of organic solvents to be used as diluents for Acryline products depending on ambient conditions.

Hammer Thinner is a blend of organic solvents to be used as diluent for Hammer Finish.

Acid Catalysed Thinner is a blend of organic solvents to be used as diluent for Acid Catalysed products.

Two Pack Etch Primer ensures good adhesion on galvanised iron and aluminium. Dilute with Etch Thinner.

One for All Mild Steel Primer is a high quality zinc phosphate acrylic emulsion primer for mild steel only.

DD Lack Thinner is a blend of organic solvents to be used as diluent for DD Lack products.

Zinc Phosphate Primer is an alkyd-based primer which protects iron against corrosion.

Aquaprimer is water based, it is ideal as a “shop” primer or as a tie-coat between incompatible products. Can be used as a primer on multiple surfaces such as galvanized iron, mild steel, wood, concrete, cement plaster and green cement. Aquaprimer can be applied by brush, roller or spray onto a clean, dry and sound surface. It dries quickly to produce a low-sheen with exceptionally good adhesion and a good abrasion resistance. Aquaprimer can be over coated with any water or solvent based top coat after 4 hours.

Bioundercoat provides good inter-coat adhesion, good opacity and will help to fill minor irregularities. It is easy to apply, dries quickly and has good sanding properties, thus enabling a perfect surface for a perfect top coat finish. It is recommended to be used in a multilayered system: (1) Aquaprimer, (2) Bioundercoat, and (3) Biogloss. Can also be used directly on wood and wood derivatives. Low odour, solvent free and water based, Bioundercoat is easy to use. Easy to sand, Bioundercoat hides minor surface defects and provides a perfect surface for further coatings.

Red Oxide Metal Primer is an alkyd based primer specially designed for iron. Available in red oxyde colour, Red Oxide Metal Primer is economical, lead free and dries quickly. It protects against corrosion. It is highly recommended in alkyd based systems.

HT 332 Metal Primer (Grey) is a two pack solvent borne vinyl modified epoxy polyamide primer with exceptional adhesion to various substrates such as steel, galvanised steel, light metals such as aluminium and alloys. It is formulated with non toxic corrosion inhibitors and can be welded or torch cut without toxic emissions. It acts as an anti-corrosive primer on steel, galvanised steel, light metals such as aluminium and alloys, as a fast dry maintenance primer, as a shop primer on steel after sand blasting, as a tie coat on old sound epoxy systems and polyurethane systems, as a blocking and bleed resistant primer. It can be used above or below splash zone, for water immersion. Ideal for interior and exterior use.

Universal Undercoat is a top quality general purpose undercoat for primed metals and wood. Should be used as an intermediate coating in the multilayered alkyd system (1) Primer, (2) Undercoat, and (3) Gloss. Universal Undercoat can also be used as a substitute to Wood Primer as first coat on wood and its derivatives. Easy to sand, Universal Undercoat allows to correct mild surface and to obtain a smooth surface for the application of final coatings.

Colorvogue

Colorvogue : Test your colors !
The sample pots are available at our 3 Concept Stores

DETAILS
paint brushes bundles

New Product: Paint Brushes Bundles
Available in packs of 3

DETAILS
A World In Colour

A World In Colour
Discover the wonderful possibilities of colour. Create beauty. Set off trends.

READY TO PLAY
Colour Therapy

Colour Therapy
It’s a well-known fact: Colours do have a direct impact on our emotions and mood.

DETAILS
Colourvogue

Colourvogue
Mauvilac Industries proposes you this selection inspired by fashionable colours of the moment.

DETAILS
Excellence & Choice of Products

Excellence & Choice of Products
An exceptional diversity of coatings for a multitude of uses.

EXPLORE
Visit Our Concept Stores

Visit Our Concept Stores
Strategically situated on the island to steer you towards your best solution.

START HERE