Walls & Ceilings
In between lies the whole world of your home or office.

Between interior surfaces and exterior ones, between ceilings and walls, this world is composed of spaces with distinct functions. These are in turn made up of varying volumes, structured by walls or laid out as open spaces. Different types of surfaces have different needs in terms of coatings. And coatings offer various finishing depending on desired light or texture effect. Inside areas are governed by ambient conditions; outside areas are subject to climate and weathering, exposure to sunlight or humidity. Now, if you add to these the material and colour of your furniture, fittings, furnishings and decoration accessories… Well, well, it does indeed make quite a lot of parameters to take into account when choosing the suitable coating for the desired result. Now, now, no need to get into a flurry! Relax— we’ve eased your way through our extensive range of specialised products right to the right choice through paint formulation, indispensable surface preparation to modes of application.

Mauvilac Industries, Snow White

Snow White is a general purpose, cost effective white decorative acrylic copolymer emulsion paint with excellent hiding power.

Mauvilac Industries, Mauvitop

Mauvitop is a high quality acrylic emulsion which dries to a smooth matt finish that is fully washable and highly scrubbable.


Mauvilac Industries, Cashmere

Mauvilisse is a range of water based decorative paints.

Mauvilac Industries, VIP Satin

VIP Satin is a premium pure acrylic emulsion paint that is easy to use and to clean while providing an attractive smooth and fully washable finish.

Mauvilac Industries, Mauvacryl

Mauvacryl is a general purpose matt acrylic emulsion paint with excellent hiding power.

Mauvilac Industries, Proflon

Proflon is a high quality acrylic-based emulsion paint formulated with special components and waxes to provide water-repellent properties.


Mauvilac Industries, Antifungus

Antifungus is a high quality acrylic co-polymer emulsion paint formulated with a high dose of fungicides and bactericides for maximum resistance to fungus.

Mauvilac Industries, One For All

One For All is a decorative and protective water based acrylic paint specially formulated for adhesion on most common building surfaces.

Mauvilac Industries, Aqualith 2in1

Aqualith2in1 is a water borne decorative paint which bears the Hydro Pliolite logo.

Mauvilac Industries, Mauvilith

Mauvilith is an alkali resistant, high quality solvent soluble acrylic paint for cement based, concrete and plaster surfaces.


Mauvilac Industries, Wallsafe

Wallsafe is a water based fully washable acrylic paint for interior use.

Mauvilac Industries, Nanotech Antibacterial

Nanotech Antibacterial is an acrylic-based emulsion paint which contains a highly active nano silver anti-bacterial agent.

Mauvilac Industries, Mauvinyl

Mauvinyl is a cost effective vinyl copolymer emulsion paint with good hiding power.


Mauvilac Industries, Cashmere

Cashmere is an acrylic copolymer emulsion paint with an attractive smooth, low sheen finish.

Mauvilac Industries, Ecowhite

Ecowhite is a low cost general purpose acrylic copolymer emulsion paint. It is easy to apply and dries quickly to a matt finish.


Snow White is a general purpose, cost effective white decorative acrylic copolymer emulsion paint with excellent hiding power. Snow White has been designed for optimum brightness and ease of application. Snow White is a decorative matt white finish recommended for interior use and exterior use in semi-dry & dry regions.

Mauvilac Industries, Snow White

Mauvilac Industries, Go GreenMauvilac Industires, MS3


Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Mauvilac Clear Emulsion Binder on powdery or absorbent surfaces to get a sound surface for proper adhesion of Snow White. For panel wood or ceiling boards, apply Mauvilac Wood Primer, the sand down the surface and dust off prior to painting.


Application Method
   
Apply by roller or brush onto clean and dry surface. Thin down with water as required depending on mode of application. Stir well. Do not overthin. One litre will cover between 9 and 12m2 of surface. Approximately 30 minutes to touch dry, can be over-coated after approximately 3 hours.


Unit Sizes
1l, 2.5l, 5l, 10l, 20l


Share
Recommend this page to your friends. Share our love for colour.


Mauvitop is a high quality acrylic emulsion which dries to a smooth matt finish that is fully washable and highly scrubbable. Mauvitop is ideal for decorating and protecting homes, offices, shops and factories. Mauvitop is economical to use due to its high hiding power and is suitable for interior. On exterior surfaces, it has proved to be effective against fungus and algal growth and to resist UV in hot and dry regions.

Mauvilac Industries, Mauvitop

Mauvilac Industries, Go GreenMauvilac Industires, MauvimatchMauvilac Industires, MS3


Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Mauvilac Clear Emulsion Binder on powdery or absorbent surfaces to get a sound surface for proper adhesion of Mauvitop. For panel wood or ceiling boards, apply Mauvilac Wood Primer, then sand down the surface and dust off prior to painting.


Application Method
Apply by roller or brush onto clean and dry surface. Thin down with water as required depending on mode of application. Stir well. Do not overthin. One litre will cover between 9 and 11m2 of surface. Approximately 30 minutes to touch dry, can be over-coated after approximately 3 hours.


Unit Sizes
1l, 5l, 20l

10L (white only)


Share
Recommend this page to your friends. Share our love for colour.


Mauvilisse is a range of water based decorative paints. Available in silk and mat finish, Mauvilisse is very convenient for wooden, concrete and metal surfaces such as furniture, doors, walls and trims. Suitable for both interior and exterior use, it is a hard wearing decorative and protective finish which dries to an attractive fully washable smooth finish.

Mauvilac Industries, Cashmere

Mauvilac Industries, Go GreenMauvilac Industires, Mauvimatch


Surface Preparation
Ensure that all surfaces to be painted are sound, clean, dry and free from defective or poorly adhering material such as efflorescence, dirt, grease or wax.  New cement based surfaces should be allowed to cure for at least 28 days.
Plaster & Concrete: Remove all loose dust and ensure surface is completely dry. Prime entire area with SEALER PRIMER in order to obtain a uniform barrier coat against alkalinity.
Wood: Remove splinters and fill defects with a wood filler. Sand smooth with 150 grit paper. If grain lifting occurs after application of primer, sand smooth with 220 grit sanding paper before topcoat is applied. AQUAGRIP can be used as primer.
Enamels and Varnished Surfaces: Remove any loose and flaking paint. Sand down slightly for proper adhesion of MAUVILISSE .
Melamine/Formica®: Degrease surface with an appropriate cleaner. Sand gently before applying AQUAGRIP.
Galvanised Steel: Clean with GALVANISED IRON CLEANER. Rinse clean. Allow to dry thoroughly.
PVC: Remove all loose dust and ensure surface is completely dry.
Aluminium: Remove all dust and grease with an appropriate cleaner. Allow to dry before applying AQUAGRIP.

Note: Not suitable in areas with direct water contact such as shower enclosures or where frequent or heavy condensation is likely to occur.


Application Method
Apply by brush, short nap or sponge roller. Can be applied by airless and conventional spray. Do not thin. Use as is.
Spreading rate / Film thickness: ± 10 m² per litre per coat for a dry film thickness of 35 microns.
Drying time: Approximately 30 – 45 minutes to touch dry, can be over-coated after 4 – 6 hours depending on ambient conditions.


Unit Sizes
1l, 5l, 20l


Share
Recommend this page to your friends. Share our love for colour.


Cashmere is an acrylic copolymer emulsion paint with an attractive smooth, low sheen finish. It is a decorative and protective coating, primarily selected for its exceptional performance, long life and long term economical advantage and is highly washable.

Mauvilac Industries, Cashmere

Mauvilac Industries, Go GreenMauvilac Industires, Mauvimatch


Surface Preparation
Remove dust, chalk, loosely adhering old paint, fungus, mould, oil, grease and any contaminant by scraping, washing, etc. Rinse and allow to dry. On surfaces which have chalked, apply one diluted coat of Clear Emulsion Binder before painting.


Application Method
Apply by roller or brush onto clean and dry surface. Thin down with water as required depending on mode of application. Do not overthin. For best results, use on part of water for ten parts of paint. One litre will cover between 6 and 8m2 of surface. Approximately 30 minutes to touch dry, can be over-coated after approximately 3 hours.


Unit Sizes
1l, 5l, 20l

10L (white only)


Share
Recommend this page to your friends. Share our love for colour.


VIP Satin is a premium pure acrylic emulsion paint that is easy to use and to clean while providing an attractive smooth and fully washable finish. The outstanding washability and scrubbability properties of VIP Satin make it the ideal choice for interiors. With a gloss level of 50%, VIP Satin can be used to brighten up dark rooms especially when colours with high reflectance values are selected. VIP Satin is also suitable for outdoor applications where a highly resistant and durable finish is required.

Mauvilac Industries, VIP Satin

Mauvilac Industries, Go GreenMauvilac Industires, Mauvimatch


Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and other contaminants before painting. Seal with Mauvilac Clear Emulsion Binder on new and powdery or absorbent surfaces to get a sound surface for proper adhesion of VIP Satin. For panel wood or ceiling boards, apply Mauvilac Wood Primer, the sand down the surface and dust off prior to painting.


Application Method
Apply by roller or brush onto clean and dry surface. Thin down with water as required depending on mode of application. Stir well. Do not overthin. One litre will cover between 6 and 8m2 of surface. Approximately 30 minutes to touch dry, can be over-coated after approximately 4 or 5 hours.


Unit Sizes
1l, 5l, 20l

10L (white only)


Share
Recommend this page to your friends. Share our love for colour.


Mauvacryl is a general purpose matt acrylic emulsion paint with excellent hiding power. Mauvacryl is a cost effective decorative paint for walls and ceilings. It is suitable for interior use but can also be applied on exterior surfaces in dry regions.

Mauvilac Industries, Mauvacryl

Mauvilac Industries, Go GreenMauvilac Industires, MauvimatchMauvilac Industires, MS3


Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Mauvilac Clear Emulsion Binder on powdery or absorbent surfaces to get a sound surface for proper adhesion of Mauvacryl. For wood or wood fiber boards, apply Mauvilac Wood Primer, then sand down the surface and dust off prior to painting.


Application Method
Apply by roller or brush onto clean and dry surface. Thin down with water as required depending on mode of application. Stir well. Do not overthin. One litre will cover between 9 and 12m2 of surface. Approximately 30 minutes to touch dry, can be over-coated after approximately 3 hours.


Unit Sizes
1l, 2.5l, 5l, 20l


Share
Recommend this page to your friends. Share our love for colour.


Proflon is a high quality acrylic-based emulsion paint formulated with Polytetrafluoroethylene and special waxes to provide hydrophobic (water-repellent) properties characterised by water beading on the surface of the dry film. It also contains a high dosage of bactericides to provide maximum resistance against algal and fungal growth. This tough, hard coating repels water, prevents fungus growth is highly washable and is self-cleaning during rainy periods. Anti-block and anti-stain, it is ideal for kitchens and bathrooms.

Mauvilac Industries, Proflon

Mauvilac Industries, Go GreenMauvilac Industires, Mauvimatch


Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Mauvilac Clear Emulsion Binder on powdery or absorbent surfaces to get a sound surface for proper adhesion of Proflon. For panel wood or ceiling boards, apply Mauvilac Wood Primer, then sand down the surface and dust off prior to painting.


Application Method
Apply three coats by roller or brush onto clean, dry and sealed surface. Can be applied using airless or low pressure spray equipment. Dilution is not necessary. One litre will cover between 8 and 10 m2 of surface in one coat. Approximately 30 minutes to touch dry, can be over-coated after approximately 3 hours. Proflon will develop its full hydrophobic properties after 36 hours. It is therefore recommended not to exceed 36 hours before recoating. After this period, it might be necessary to sand down slightly before applying the next coat.


Unit Sizes
1l, 5l, 20l


Share
Recommend this page to your friends. Share our love for colour.


Antifungus is a high quality acrylic co-polymer emulsion paint formulated with a high dosage blend of fungicides and bactericides for maximum resistance to fungus. Its matt, anti fungus finish is also recommended for bathrooms. Recommended for exterior surfaces, Mauvilac Antifungus is highly effective in humid areas. Thanks to its UV- resistant pigments, vivid natural colours last longer.

Mauvilac Industries, Antifungus

Mauvilac Industries, Go GreenMauvilac Industires, Mauvimatch


Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Mauvilac Clear Emulsion Binder on powdery or absorbent surfaces to get a sound surface for proper adhesion of Mauvilac Antifungus. For wood or wood fiber boards, apply Mauvilac Wood Primer, then sand down the surface and dust off prior to painting.


Application Method
Apply by roller or brush onto clean and dry surface. Thin down with water as required depending on mode of application. Do not overthin. One litre will cover between 9 and 11 m2 of smooth surface in one coat and 3-5m2 of rough surface. Approximately 30 minutes to touch dry, can be over-coated after approximately 3 hours.


Unit Sizes
1l, 5l, 20l

10L (white only)


Share
Recommend this page to your friends. Share our love for colour.


One For Allis a decorative and protective water based acrylic paint specially formulated for adhesion on most common building surfaces. It can be used as the sole paint for all paintwork. One For All You will precisely execute all your decorative ideas (stenciling, glass and ceramic painting, picture frames, to name just a few). One For All is resistant to microbial growth and can be used on roofs. It is easy to use, has a low odour and is highly washable.

Mauvilac Industries, One For All

Mauvilac Industries, Go GreenMauvilac Industires, Mauvimatch


Surface Preparation
All surfaces should be sound, dry and clean. Do not apply on old coatings that are loosely adhering. It is better though not essential to sand slightly galvanised steel, stainless steel, aluminium and alloys with fine abrasive paper. Degrease with Acryline Pre Cleaner. Mild steel should be free of rust and mill scale before application of One For All Mild Steel Primer.


Application Method
Apply by roller or brush onto clean and dry surface. One For All Mild Steel Primer can be applied by airless or low-pressure spray equipment. Thin down with water as required depending on mode of application. Do not overthin. One litre will cover between 9 and 12 m2 of surface in one coat. Approximately 30 minutes to touch dry, can be over-coated after approximately 3 hours. Will achieve full hardness and adhesion after 2 weeks.


Unit Sizes
1l, 5l, 20l


Share
Recommend this page to your friends. Share our love for colour.


Aqualith2in1 is a water borne decorative paint which bears the Hydro Pliolite logo. It has the best compromise between micro porosity, impermeability and adhesion, and it regulates effectively the hygrometry within walls allowing them to breathe. It can be used in all types of environments, urban, industrial and marine. Aqualith2in1 dries to a deep mat finish. Comparatively to normal emulsion paints, better colour retention is achieved with Aqualith2in1 against UV, especially with bright colours. Aqualith2in1 contains a high dosage of fungicides for increased resistance against fungus and algae. Due to its deep mat finish, Aqualith2in1 will contribute towards camouflaging minor surface defects.

Mauvilac Industries, Aqualith

Surface Preparation
Surfaces should be sound, clean and dry. Sound and slightly porous surfaces: Apply 2–3 coats of Aqualith2in1 diluted 5% with water. Slightly chalking surfaces, gypsum plasters, cement based plasters and concrete: Apply one coat of Aqualith2in1 diluted 10% with water. Finish with 2 coats of Aqualith2in1 diluted 5% with water if necessary. Old surfaces, chalking surfaces: prepare surfaces to obtain a sound surface for painting. Remove chalk by washing with water under high pressure, remove fungus and algae. Sterilise surface by applying a fungicidal treatment. Repair cracks as necessary. When surface is clean and dry, apply one coat of Aqualith2in1 diluted with 10% water, finish with 2 coats of Aqualith2in1 diluted 5% with water if necessary.


Application Method
Dilute with water as required. Apply 2-3 coats with a brush or long hair roller or airless spray. Covering capacity: 6–8 m² per litre per coat. Drying time: approximately 60 minutes. Recoating interval: 6 hours.


Unit Sizes
5l, 20l


Share
Recommend this page to your friends. Share our love for colour.


Mauvilith is an alkali resistant, high quality solvent soluble acrylic paint for cement based, concrete and plaster surfaces. It is a decorative and protective coating primarily selected for its exceptional performance, long life and long term economical advantage. It is recommended for homes, offices, factories, shops, hotels and other related structures. Mauvilith is easy to apply and dries rapidly to a hard, tough, washable and resistant matt finish. It is self-cleaning due to its typical tendency to chalk when exposed to sunlight, through this process Mauvilith does not retain dirt, dust and organic particles which normally promote fungus growth.

Mauvilac Industries, Mauvilith

Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Remove all fungus with Fungicidal Wash, rince and treat with Fungicidal Treatment. Repair cracks with Acrylic Crack Filler. On absorbent surfaces, apply a coat of Mauvilith Sealer diluted with Test Benzin. Powdery surfaces have to be sanded, cleaned and washed prior to the application of Mauvilith Sealer.


Application Method
Apply two to three coats by roller or brush onto clean, and dry surfaces. Low pressure or airless spray equipment can also be used. Thin down with Test Benzin as required. For best results do not exceed the dilution volume ratio of 1 part of Test Benzin to 8 parts of paint. One litre of Mauvilith will cover between 6 and 8 m² of surface in one coat ; at this spreading rate the dry film thickness will vary between 55 and 41 microns on a completely smooth, non absorbent surface. Approximately 30 minutes to touch dry, Mauvilith can be over-coated after approximately 6 hours.


Unit Sizes
1l, 5l, 20l


Share
Recommend this page to your friends. Share our love for colour.


Wallsafe is a water based fully washable acrylic paint for interior use. Wallsafe is capable of decomposing toxic organic substances such as formaldehyde (present in certain types of medium fibre density boards used in the furniture industry) under the action of light. It also has the ability to reduce odours, for example tobacco smoke, present in ambient air. Wallsafe can thus contribute to a better living environment indoors.

Mauvilac Industries, Wallsafe

Mauvilac Industries, Go Green


Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Aquaprimer on powdery or absorbent surfaces to get a sound surface for proper adhesion of Wallsafe. For panel wood or ceiling boards, apply BioUndercoat, then sand down the surface and dust off prior to painting.


Application Method
Apply by roller or brush onto clean and dry surface. Wallsafe can be applied by airless or low-pressure spray equipment. Dilute with water if required. However for an efficient paint finish, avoid dilutiing as thinning will reduce opacity. One litre of Wallsafe will cover between 8 and 10 m2 of surface in one coat; at this spreading rate the dry film thickness will vary between 50 and 40 microns on a completely smooth, non absorbent surface. Total film thickness required will be dependent on applications and specifications. For normal applications, apply three coats of 40-50 microns. It will take apprroximately 30 minutes to touch dry, Wallsafe can be over-coated after approximately 3 hours.


Unit Sizes
1l, 5l, 20l


Share
Recommend this page to your friends. Share our love for colour.


Nanotech Antibacterial is an acrylic-based emulsion paint which contains a highly active nano silver anti-bacterial agent. Nanotech Antibacterial works by releasing silver ions at the surface of the paint film in a controlled manner, it is highly effective against Methicillin Resistant Staphylococcus Aureus, Klebsillia species, Aspergillus Niger and other gram positive, gram negative micro organisms. Nanotech Antibacterial can easily be cleaned and washed, it is resistant to common household detergents and disinfectants. Nanotech Antibacterial can be used safely in areas where a high level of hygienic properties is required and contributes to a cleaner, healthier environment. Its action is long lasting as the silver ions remain effective even after they have sterilised the micro-organisms.

Mauvilac Industries, Nanotech Antibacterial

Mauvilac Industries, Go Green


Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Mauvilac Clear Emulsion Binder on powdery or absorbent surfaces to get a sound surface for proper adhesion of Nanotech Antibacterial. For panel wood or ceiling boards, apply Mauvilac Wood Primer, then sand down the surface and dust off prior to painting.


Application Method
Apply three coats by roller or brush onto clean, dry and sealed surface. Nanotech Antibacterial can be applied by airless or low-pressure spray equipment. Dilution is not necessary. However if dilution is required for ease of application, thin down with water as required. One litre of Nanotech Antibacterial will cover between 9 and 12 m2 of surface in one coat; at this spreading rate the dry film thickness will vary between 40 and 35 microns on a completely smooth, non absorbent surface.


Unit Sizes
5l, 20l


Share
Recommend this page to your friends. Share our love for colour.


Mauvinyl is a cost effective vinyl copolymer emulsion paint with good hiding power. Mauvinyl is easy to apply and dries to a matt finish. It is recommended for ceilings and other interior surfaces subject to low wear and tear conditions.

Mauvilac Industries, Mauvinyl

Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Mauvilac Clear Emulsion Binder on powdery or absorbent surfaces to get a sound surface for proper adhesion of VIP Satin. For panel wood or ceiling boards, apply Mauvilac Wood Primer, then sand down the surface and dust off prior to painting.


Application Method
Apply by roller or brush onto clean and dry surface. Thin down with water as required depending on mode of application. Stir well. Do not overthin. One litre will cover between 7 and 9m2 of surface. Approximately 30 minutes to touch dry, can be over-coated after approximately 3 hours.


Unit Sizes
2.5l, 5l, 20l

10L (white only)


Share
Recommend this page to your friends. Share our love for colour.


Ecowhite is a low cost general purpose acrylic copolymer emulsion paint. It is easy to apply and dries quickly to a matt finish. Ecowhite can be used where an economical coating is required and is recommended as a cost effective coating for ceilings and surfaces which are normally subjected to low wear and tear levels.

Mauvilac Industries, EcoWhite

Surface Preparation
Ensure surfaces are sound, clean, dry and free from dirt, grease and any other contaminants before painting. Seal with Mauvilac Clear Emulsion Binder on new and powdery or absorbent surfaces to get a sound surface for proper adhesion of Ecowhite.


Application Method
Apply by roller or brush onto clean and dry surface. Thin down with water as required depending on mode of application. Stir well. Do not over dilute. One litre will cover between 7and 9 m2 of surface. Approximately 30 minutes to touch dry, can be over-coated after approximately 3 hours.


Unit Sizes
5l, 10l, 20l


Share
Recommend this page to your friends. Share our love for colour.

Colorvogue

Colorvogue : Test your colors !
The sample pots are available at our 3 Concept Stores

DETAILS
paint brushes bundles

New Product: Paint Brushes Bundles
Available in packs of 3

DETAILS
A World In Colour

A World In Colour
Discover the wonderful possibilities of colour. Create beauty. Set off trends.

READY TO PLAY
Colour Therapy

Colour Therapy
It’s a well-known fact: Colours do have a direct impact on our emotions and mood.

DETAILS
Colourvogue

Colourvogue
Mauvilac Industries proposes you this selection inspired by fashionable colours of the moment.

DETAILS
Excellence & Choice of Products

Excellence & Choice of Products
An exceptional diversity of coatings for a multitude of uses.

EXPLORE
Visit Our Concept Stores

Visit Our Concept Stores
Strategically situated on the island to steer you towards your best solution.

START HERE